McDATA Sphereon 4500 User Manual download pdf (Page 63)

Hardware View

2-7

Monitoring and Managing the Switch

• Unit Beaconing Indicator. The amber system error indicator

blinks if unit beaconing is enabled. Enable and disable unit

beaconing by right-clicking on the front or rear view away

from a hardware component and selecting Enable Unit

Beaconing from the menu.

Rear View 1. Power Supply Status: Each AC power connector indicates the

location of an internal power supply. An amber, service-required LED

indicator is located in the upper left corner of each AC power

connector. The indicator illuminates if the power supply has failed

and requires service. The indicator is off if the power supply is active.

When a red and yellow diamond ( ) displays on a power connector,

like in Figure 2-1 on page 2-5, the internal power supply for that

connector failed. Note that the switch operates with one power

supply failure, however replace the power supply as soon as possible

to retain redundancy.

Obtaining Hardware

Information

This section explains how to access the FRU Properties, Port Properties,

and Switch Properties dialog boxes.

Displaying FRU

Information

Display the FRU Properties dialog box using one of the following

methods:

• Double-click on a FRU, such as a power supply module

illustrated in the Hardware View.

• Select a FRU in the Hardware View, then select FRU and FRU

Properties from the Product menu.

• Double-click on a row in the FRU List view.

The FRU Properties dialog box displays the FRU name; slot position

relative to identical FRUs installed in the chassis, active or failed

state, part number, and serial number.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 215 216

No comments

McDATA Sphereon 4500 User Manual Page 63