McDATA OPENconnectors Command Line Interace User Manual download pdf (Page 92)

100

101

2-48

E/OS Command Line Interface User Manual

config

NOTE: The SANtegrity Authentication feature key must be installed to

configure the FCCT key.

Parameters This command has no required parameters.

Command Example

Root> config security authentication interface osms

setKey

config.security.authentication.interface.serial.enhancedAuth

Syntax enhancedAuth enhancedAuthState

Purpose This command sets the enhanced serial authentication state.

Enhanced Serial Authentication requires users to enter a password

when gaining access to the serial port interface.

Parameters This command has one parameter:

Command Example

Root> config security authentication serial enhancedAuth

enable

config.security.authentication.interface.show

Syntax show interface

Purpose This command displays the settings in the local authentication

database for a single interface.

NOTE: The SANtegrity Authentication feature key must be installed to view

the E_Port, N_Port, and OSMS information.

enhancedAuthState This parameter enables and disables enhanced

authentication on the serial port interface.

Accepted values for this parameter are enable or

disable. Boolean 1 and 0 values may also be

substituted.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 405 406

Comments to this Manuals

No comments

McDATA OPENconnectors Command Line Interace User Manual Page 92

Comments to this Manuals

Related products and manuals for Networking McDATA OPENconnectors Command Line Interace