McDATA Intrepid 6064 Director Service Manual

380 Interlocken Crescent Broomfield, CO 80021-3464Corporate Headquarters:800-545-5773Sales E-mail:[email protected]:www.mcdata.comIntrepid®6064 Dire

Intrepid® 6064 Director Installation and Service ManualxContentsOperating Environment...B-2Fab

22-58Intrepid® 6064 Director Installation and Service ManualInstallation Tasksf. At the NPIV field, check (enable) or uncheck (disable) N_Portidentifi

2Installation Tasks2-59Installation Tasksb. At the E_D_TOV field, type a value between 2 through 600tenths of a second (0.2 through 60 seconds).NOTE:

22-60Intrepid® 6064 Director Installation and Service ManualInstallation TasksConfigure PortsTo configure Fibre Channel ports:1. At the Hardware View,

2Installation Tasks2-61Installation Taskse. Selectfromthe drop-downlist in theType column toconfigurethe port type. Available selections are fabric po

22-62Intrepid® 6064 Director Installation and Service ManualInstallation TasksFigure 2-31 Configure SNMP Dialog Boxa. Click Enable SNMP Agent and Enab

2Installation Tasks2-63Installation Tasks• An attention indicator (yellow triangle) associated with a port atthe Hardware View, Port List View,orPort

22-64Intrepid® 6064 Director Installation and Service ManualInstallation TasksFigure 2-33 New Threshold Alert Dialog Box (Screen 2)6. Type a value fro

2Installation Tasks2-65Installation Tasks12. Click Finish.TheConfigure Threshold Alerts dialog box reappearslisting the name, type, and state of the a

22-66Intrepid® 6064 Director Installation and Service ManualInstallation Tasks2. At the SANavigator or EFCM main window, select EventNotification and

2Installation Tasks2-67Installation Tasks11. Click Send Test Email.Atestmessageissenttoconfiguredrecipients.12. Click OK to save the information and c

Figuresxi1-1 Cabinet-Mounted Intrepid 6064 Directors and Management Server ... 1-31-2 Director FRUs (Front Access) ...

22-68Intrepid® 6064 Director Installation and Service ManualInstallation Tasks1. Minimize the Element Manager application and return to theSAN managem

2Installation Tasks2-69Installation Tasks— IP Access Control - Configure a list ofdevice IPaddresses orarangeofdeviceIPaddressesauthorizedtocommunicat

22-70Intrepid® 6064 Director Installation and Service ManualInstallation Tasks• Preferredpath-Use the Preferred Path option from the Configuremenu (El

2Installation Tasks2-71Installation Tasksand verified whileperforming Task 14: Record or Verify Server RestoreInformation.To back up server configurat

22-72Intrepid® 6064 Director Installation and Service ManualInstallation Tasksb. Select the Restart option from the list box and click OK.Theserver po

2Installation Tasks2-73Installation TasksTask 21: Cable Fibre Channel PortsPerform this task to cable Fibre Channel ports and connect devices:1. Route

22-74Intrepid® 6064 Director Installation and Service ManualInstallation Tasks• A zone set name cannot contain spaces.• Valid characters are alphanume

2Installation Tasks2-75Installation Tasks— If the values must be changed from the management server,refer to Task 19: Configure the Element Manager Ap

22-76Intrepid® 6064 Director Installation and Service ManualInstallation Tasks• Technical publications.• Firmware and software upgrades.• Technical ne

2Installation Tasks2-77Installation Tasks3. Complete fields as required and click Register.Theregistrationiscomplete and Filecenter login information

xiiIntrepid® 6064 Director Installation and Service ManualFigures2-19 Add New User Wizard ...

22-78Intrepid® 6064 Director Installation and Service ManualInstallation Tasks

Maintenance Analysis Procedures (MAPS)3-13Maintenance AnalysisProcedures (MAPS)This chapter describesmaintenance analysisprocedures(MAPs)usedby servic

33-2Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)Quick StartTable 3-2 lists andsummarizes MAPs. Faulti

3Quick Start3-3Maintenance Analysis Procedures (MAPS)060 Fabric controller unable to synchronize databases. Go to MAP 0600.061 Fabric Controller datab

33-4Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)151 Fabric configuration failure. Go toCollecting Mai

3Quick Start3-5Maintenance Analysis Procedures (MAPS)410 CTP card reset. No action required.411 Firmware fault. Go to MAP 0200.412 CTP watchdog timer

33-6Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)453 New feature key installed. No action required.500

3Quick Start3-7Maintenance Analysis Procedures (MAPS)600 SBAR assembly hot-insertion initiated. No action required.601 SBAR assembly recognized. No ac

33-8Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)MAP 0000: Start MAPThis MAP describes initial fault i

3MAP 0000: Start MAP3-9Maintenance Analysis Procedures (MAPS)Are any amber LEDs illuminated?NO YES↓ A FRU failure, power-on self-test (POST) failure,

FiguresxiiiFigures4-20 Discover Setup Dialog Box ... 4-524-21 Address Properties

33-10Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)NO YES↓ Communication between the product and manage

3MAP 0000: Start MAP3-11Maintenance Analysis Procedures (MAPS)— EFCM Basic Edition - SelectLink Incidentfrom theLogsmenu at any view. TheLink Incident

33-12Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)— EFCM Basic Edition - SelectEventfrom theLogsmenu a

3MAP 0100: Power Distribution Analysis3-13Maintenance Analysis Procedures (MAPS)MAP 0100: Power Distribution AnalysisThis MAP describes fault isolatio

33-14Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)3As indicated by visual inspection or an event code,

3MAP 0100: Power Distribution Analysis3-15Maintenance Analysis Procedures (MAPS)c. Ensure AC power cords are not damaged. If damaged, replacethe cords

33-16Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)MAP 0200: POST Failure AnalysisThis MAP describes fa

3MAP 0200: POST Failure Analysis3-17Maintenance Analysis Procedures (MAPS)3The backplane failed POSTs (indicated by a FRU code 01)andmustbe replaced (

33-18Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)Did SBAR assembly replacement solve the problem?NO Y

3MAP 0200: POST Failure Analysis3-19Maintenance Analysis Procedures (MAPS)8A port card failed POSTs (indicated by FRU codes 08 through 0F)and must be

xivIntrepid® 6064 Director Installation and Service ManualFigures

33-20Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)MAP 0300: Loss of Server CommunicationThis MAP descr

3MAP 0300: Loss of Server Communication3-21Maintenance Analysis Procedures (MAPS)Is the product powered on?YES NO↓ A power distribution problem is ind

33-22Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)• An illuminated PWR LED (green) or ERR LED (amber).

3MAP 0300: Loss of Server Communication3-23Maintenance Analysis Procedures (MAPS)a. Ensure an RJ-45 Ethernet cable connects the product to a hub. Ifno

33-24Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)Figure 3-1 Daisy-Chained Ethernet HubsWas the mainte

3MAP 0300: Loss of Server Communication3-25Maintenance Analysis Procedures (MAPS)13A problem with LAN-attached device is indicated.• If the problem is

33-26Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)Was the maintenance action successful?NO YES↓ The ma

3MAP 0300: Loss of Server Communication3-27Maintenance Analysis Procedures (MAPS)b. Type the user ID and password obtained inMAP 0000: StartMAP.c. Typ

33-28Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)g. ConfigurePort Settingsparameters:—Bits per second

3MAP 0300: Loss of Server Communication3-29Maintenance Analysis Procedures (MAPS)d. Move the reconfigured product from theAvailable Addresseslistto th

Tablesxv1-1 Element Manager Alert Symbols, Messages, and Status ... 1-132-1 Factory-Set Defaults (Director) ...

33-30Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)MAP 0400: FRU Failure AnalysisThis MAP describes fau

3MAP 0400: FRU Failure Analysis3-31Maintenance Analysis Procedures (MAPS)2Fan status polling is temporarily disabled and status values for one ormore

33-32Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)YES NO↓ Contact the next level of support. Exit MAP.

3MAP 0400: FRU Failure Analysis3-33Maintenance Analysis Procedures (MAPS)7An SBAR assembly is not recognized by director firmware becausethe firmware

33-34Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)MAP 0500: Port Failure or Link Incident AnalysisThis

3MAP 0500: Port Failure or Link Incident Analysis3-35Maintenance Analysis Procedures (MAPS)2Table 3-10 lists link incident messages and MAP steps.3The

33-36Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)c. The WWN must be entered in (XX:XX:XX:XX:XX:XX:XX:

3MAP 0500: Port Failure or Link Incident Analysis3-37Maintenance Analysis Procedures (MAPS)5A connection is not allowed because of a conflict with the

33-38Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)• The product is configured to operate in Open Fabri

3MAP 0500: Port Failure or Link Incident Analysis3-39Maintenance Analysis Procedures (MAPS)• If the port is operational with no device attached, both

xviIntrepid® 6064 Director Installation and Service ManualTables5-3 Nonconcurrent FRUs ...

33-40Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)Contact the next level of support. Exit MAP.11A conn

3MAP 0500: Port Failure or Link Incident Analysis3-41Maintenance Analysis Procedures (MAPS)modify the IP address access control list, product-level au

33-42Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)• Optical transceiver does not support the configure

3MAP 0500: Port Failure or Link Incident Analysis3-43Maintenance Analysis Procedures (MAPS)A port card failure is indicated. Go to step 21.19A port fa

33-44Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)Figure 3-2 UPM Card Diagram (OSI)Figure 3-3 UPM Card

3MAP 0500: Port Failure or Link Incident Analysis3-45Maintenance Analysis Procedures (MAPS)• Verify the location of the failed port. Figure 3-2 and Fi

33-46Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)a. Inform the customer the port will be blocked. Ens

3MAP 0500: Port Failure or Link Incident Analysis3-47Maintenance Analysis Procedures (MAPS)26The attached device is causing the recurrent link inciden

33-48Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)MAP 0600: Fabric or ISL Problem AnalysisThis MAP des

3MAP 0600: Fabric or ISL Problem Analysis3-49Maintenance Analysis Procedures (MAPS)2A minor error occurred that caused the Fabric Services database to

Intrepid® 6064 Director Installation and Service ManualxviiPrefaceThis publication is part of a documentation suite that supports theMcDATA® Intrepid®

33-50Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)6Fabric Controller software detected:• A fabric elem

3MAP 0600: Fabric or ISL Problem Analysis3-51Maintenance Analysis Procedures (MAPS)8An E_Port segmented because the error detect time out value(E_D_TO

33-52Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)Was the maintenance action successful?NO YES↓ The fa

3MAP 0600: Fabric or ISL Problem Analysis3-53Maintenance Analysis Procedures (MAPS)10An E_Port segmented because two products had incompatible zoningc

33-54Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)12Reset the product (IML, IPL, or Reset the Director

3MAP 0600: Fabric or ISL Problem Analysis3-55Maintenance Analysis Procedures (MAPS)Was the maintenance action successful?NO YES↓ The fabric, ISL, and

33-56Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)17An E_Port is fenced because of a protocol error. D

3MAP 0600: Fabric or ISL Problem Analysis3-57Maintenance Analysis Procedures (MAPS)— SAN management application - Refer to theSANavigatorSoftware Rele

33-58Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)• Event code 142 - OpenTrunking firmware detected an

3MAP 0600: Fabric or ISL Problem Analysis3-59Maintenance Analysis Procedures (MAPS)23A zone merge process failed during ISL initialization. The follow

xviiiIntrepid® 6064 Director Installation and Service ManualPrefacedata, collect maintenance data, power-on, power-off, and resetthe director, set the

33-60Intrepid® 6064 Director Installation and Service ManualMaintenance Analysis Procedures (MAPS)Obtain supplementary error code data for event code

Repair Information4-14Repair InformationThis chapter describes repair-related procedures for the Intrepid 6140Director.Theproceduresareperformedatthed

44-2Intrepid® 6064 Director Installation and Service ManualRepair InformationFactory DefaultsTable 4-1 lists the defaults for the passwords, and IP, s

4Obtaining Log Information4-3Repair InformationObtaining Log InformationThe SAN management application, Element Manager application,and EFCM Basic Edi

44-4Intrepid® 6064 Director Installation and Service ManualRepair InformationEvent LogThe Event Log records simple network management protocol (SNMP)t

4Obtaining Log Information4-5Repair Information• Network Address - TheIPaddressorconfigurednameofthedirector. This address or name corresponds to the

44-6Intrepid® 6064 Director Installation and Service ManualRepair Information• Date/Time - The date and time the FRU was inserted or removed.• FRU - A

4Obtaining Log Information4-7Repair Information•Port- The port number where the alert occurred.•Type- The type of alert: transmit (Tx) or receive (Rx)

44-8Intrepid® 6064 Director Installation and Service ManualRepair Information• Direction - The Fibre Channel frame direction (In or Out).• Frame Heade

4Obtaining Log Information4-9Repair Information• Error Code - The three-digit code that describes the event(Appendix A, Event Code Tables).• Severity

Intrepid® 6064 Director Installation and Service ManualxixPrefaceRelated Publications Other publications that provide additional information about the

44-10Intrepid® 6064 Director Installation and Service ManualRepair Information• Old Exit Port - Thedirectorportnumber(decimal)usedfortransmitting Fibr

4Obtaining Port Diagnostic Information4-11Repair Information• EOF - The end of frame character (hexadecimal).• Payload Size - The size of frame payloa

44-12Intrepid® 6064 Director Installation and Service ManualRepair InformationElement Manager Application DiagnosticsTo obtain port operational inform

4Obtaining Port Diagnostic Information4-13Repair InformationPort List ViewTo open the Port List View,clickthePort List tab at any view(Figure 4-1). A

44-14Intrepid® 6064 Director Installation and Service ManualRepair Informationlevel indicators corresponding to 5%of maximum port throughput.Ifany act

4Obtaining Port Diagnostic Information4-15Repair InformationPort Properties Dialog BoxTo open the Port Properties dialog box (Figure 4-2), double-clic

44-16Intrepid® 6064 Director Installation and Service ManualRepair Information• Port WWN - The Fibre Channel WWN of the port.• Attached Port WWN - The

4Obtaining Port Diagnostic Information4-17Repair Information• Zoning Enforcement - The zoning policy enforced (Hard Zoning,Soft Zoning,orN/A).Port Tec

44-18Intrepid® 6064 Director Installation and Service ManualRepair InformationPort List ViewTo open the Port List View, select Port List from the Prod

4Obtaining Port Diagnostic Information4-19Repair InformationInspect Port PropertiesAt the Port List View, click a physical port number listed in the P

Intrepid® 6064 Director Installation and Service ManualiiRecord of Revisions and UpdatesRevision Date Description620-000108-100 2/2001 Initial release

xxIntrepid® 6064 Director Installation and Service ManualPrefaceFor technical support for the SANavigator®application, contact theSANavigatorSolutionC

44-20Intrepid® 6064 Director Installation and Service ManualRepair Information• Transceiver Type - The installed transceiver type (SFP, XFP,orUnknown)

4Performing Loopback Tests4-21Repair Information• Error Statistics - These statistics include the number of linkfailures; synchronization and signal l

44-22Intrepid® 6064 Director Installation and Service ManualRepair InformationNOTE: At the start of the loopback test, the port or port card can beonl

4Performing Loopback Tests4-23Repair Information8. When finished, click Cancel to close the Port Diagnostics dialogbox.9. Reset the port:a. At the Har

44-24Intrepid® 6064 Director Installation and Service ManualRepair Informationc. A red progress bar (indicating percent completion) travelsfrom left t

4Performing Loopback Tests4-25Repair InformationFigure 4-6 Diagnostics View3. Type the port number to be tested in the Targeted Port Numberfield.4. At

44-26Intrepid® 6064 Director Installation and Service ManualRepair Informationc. Click OK at the bottom of the page. The port resets and themessage Yo

4Blocking and Unblocking Ports4-27Repair Informationb. For the tested port, click the check box in the Reset column. Acheck mark in the box indicates

44-28Intrepid® 6064 Director Installation and Service ManualRepair Information• AcheckmarkappearsadjacenttotheBlock Portor Block AllPorts menu option.

4Swapping Ports4-29Repair InformationFigure 4-7 Basic Information View2. Perform one of the following:— Click the check box for the selected port in t

Intrepid® 6064 Director Installation and Service ManualxxiPrefaceFederalCommunicationsCommission (FCC)StatementThe director generates, uses, and can r

44-30Intrepid® 6064 Director Installation and Service ManualRepair InformationFigure 4-8 Swap Ports Dialog Box2. Select the radio button associated wi

4Performing Channel Wrap Tests (FICON)4-31Repair InformationPerforming Channel Wrap Tests (FICON)A channel wrap test is a diagnostic procedure that ch

44-32Intrepid® 6064 Director Installation and Service ManualRepair InformationCollecting Maintenance DataWhen director operational firmware detects a

4Collecting Maintenance Data4-33Repair Information2. Remove the backup CD from themanagement server compactdisk-rewritable (CD-RW) drive and insert a

44-34Intrepid® 6064 Director Installation and Service ManualRepair Information3. Insert a blank diskette in the floppy drive of the PCcommunicating wi

4Powering the Director On or Off4-35Repair Information2. The director powers on and performs power-on self-tests(POSTs). During POSTs:— Amber LEDs on

44-36Intrepid® 6064 Director Installation and Service ManualRepair Information4. If servicing the director, disconnect power cord(s) from the inputAC

4Setting the Director Online or Offline4-37Repair InformationFigure 4-11 Set Online State Dialog BoxSet Online or Offline (EFCM Basic Edition)To set t

44-38Intrepid® 6064 Director Installation and Service ManualRepair InformationIML, IPL, or Reset the DirectorAn IML or reset is performed at the CTP f

4IML, IPL, or Reset the Director4-39Repair Information— The status bar at the bottom of the window displays a greysquare, indicating director status i

xxiiIntrepid® 6064 Director Installation and Service ManualPreface• The director conforms with all protection requirements of EUdirective 73/23/EEC (L

44-40Intrepid® 6064 Director Installation and Service ManualRepair Information— The director-to-management server Ethernet link dropsmomentarily and t

4Downloading Director Firmware and Software4-41Repair Information— Hold the duster upright and keep the air nozzleapproximately 50 millimeters (two in

44-42Intrepid® 6064 Director Installation and Service ManualRepair Information• Downloading firmware and software versions to the directorfrom the EFC

4Downloading Director Firmware and Software4-43Repair Information3. Type the user name and password (assigned and registered whileperforming Task 24:

44-44Intrepid® 6064 Director Installation and Service ManualRepair InformationDownload Firmware and Software to Director (Element Manger Application)T

4Downloading Director Firmware and Software4-45Repair Information7. The new firmware version and associated description appear inthe Firmware Library

44-46Intrepid® 6064 Director Installation and Service ManualRepair InformationDownloadFirmwareandSoftwaretoDirector(EFCMBasicEdition)To download a fir

4Installing or Upgrading Software4-47Repair Information5. Click OK todownloadthefirmwareto thedirector. Thedownloadtakes several minutes, during which

44-48Intrepid® 6064 Director Installation and Service ManualRepair Information— Ensure the desired software version is obtained from theFilecenter and

4Installing or Upgrading Software4-49Repair Informationb. Select the Restart option from the list box and click OK.Theserver powers down and restarts.

Intrepid® 6064 Director Installation and Service ManualxxiiiPreface• Always use correct replacement parts.• Keep all paperwork up to date, complete, a

44-50Intrepid® 6064 Director Installation and Service ManualRepair InformationManaging Configuration DataThe Element Manager and the EFCM Basic Editio

4Managing Configuration Data4-51Repair Information2. Set the director offline (SettingtheDirectorOnlineorOfflineonpage 4-36).3. At the Element Manager

44-52Intrepid® 6064 Director Installation and Service ManualRepair Information5. Click Reset tostarttheresetandclosethedialogbox.6. The IP address res

4Managing Configuration Data4-53Repair InformationFigure 4-21 Address Properties Dialog Boxe. Type 10.1.1.10 in the IP Address field and click OK.Entr

44-54Intrepid® 6064 Director Installation and Service ManualRepair InformationBack Up Configuration (EFCM Basic Edition)To back up the director config

4Managing Configuration Data4-55Repair Information3. Select Restore Configuration from the Maintenance menu at anyview. The Restore Configuration View

44-56Intrepid® 6064 Director Installation and Service ManualRepair Information5. Click OK to reset the configuration. The message "Your changesha

Removal and Replacement Procedures (RRPs)5-15Removal andReplacement Procedures(RRPs)This chapter describes removal and replacement procedures (RRPs)us

55-2Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)Procedural NotesNOTE: The screens in this manual m

5Removing and Replacing FRUs5-3Removal and Replacement Procedures (RRPs)Removing and Replacing FRUsThis section describes procedures to remove and rep

xxivIntrepid® 6064 Director Installation and Service ManualPreface

55-4Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)Figure 5-1 ESD Grounding Point (Front)The ESD grou

5Removing and Replacing FRUs5-5Removal and Replacement Procedures (RRPs)Concurrent FRUsTable 5-2 lists the concurrent FRUs. Concurrent FRUs are remove

55-6Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)RRP: Cable Management AssemblyUse the following pr

5RRP: Cable Management Assembly5-7Removal and Replacement Procedures (RRPs).Figure 5-3 Cable Management Assembly Removal and ReplacementReplacement To

55-8Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)RRP: CTP2 CardUse the following procedures to remo

5RRP: CTP2 Card5-9Removal and Replacement Procedures (RRPs)5. The CTP2 card is secured to the director chassis with two captiveAllen screws. The botto

55-10Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)1. Wait approximately 20 seconds after removal of

5RRP: CTP2 Card5-11Removal and Replacement Procedures (RRPs)— Do not reinstall the failed replacement CTP2 card because thiscan corrupt director firmw

55-12Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)13. If the customer requests the replacement CTP2

5RRP: Port Module Card (UPM)5-13Removal and Replacement Procedures (RRPs)RRP: Port Module Card (UPM)Use the following procedures toremove or replace a

General Information1-11General InformationThe McDATA®Intrepid™ 6064 Director provides up to 64 ports ofhigh-performance, dynamic Fibre Channel connect

55-14Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)4. Identify the defective port card from the ambe

5RRP: Port Module Card (UPM)5-15Removal and Replacement Procedures (RRPs)b. InsertthetorquetoolintothecamAllenscrewatthetop of thecard(Figure 5-5). To

55-16Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)b. Insert the torque tool into the locking Allen

5RRP: Port Module Card (UPM)5-17Removal and Replacement Procedures (RRPs)b. Verify portcard information (FRUname, position, and state)iscorrect.If a p

55-18Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)RRP: Optical Transceiver (SFP)Use the following p

5RRP: Optical Transceiver (SFP)5-19Removal and Replacement Procedures (RRPs)b. Place a protective cap over the cable connector.7. Dependingon themanuf

55-20Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)4. Reconnect the fiber-optic jumper cable:a. Remo

5RRP: Optical Transceiver (SFP)5-21Removal and Replacement Procedures (RRPs)— If at the management server, open the Hardware View and:a. Right-click t

55-22Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)RRP: Filler Blank (UPM)Use the following procedur

5RRP: Filler Blank (UPM)5-23Removal and Replacement Procedures (RRPs)Figure 5-7 Filler Blank Removal and ReplacementReplacement To replace a filler bl

11-2Intrepid® 6064 Director Installation and Service ManualGeneral Informationcomputing environments, and provides data transmission and flowcontrol b

55-24Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)RRP: Power SupplyUse the following procedures tor

5RRP: Power Supply5-25Removal and Replacement Procedures (RRPs)7. Pull the power supply from the director (Figure 5-8,partC).Support the power supply

55-26Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)b. Push the cam lever in and to the left to cam t

5RRP: Power Supply5-27Removal and Replacement Procedures (RRPs)a. Click the Switch tab at the Operations panel. The Operationspanel opens with the Swi

55-28Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)RRP: RFI ShieldUse the following procedures to re

5RRP: SBAR Assembly5-29Removal and Replacement Procedures (RRPs)RRP: SBAR AssemblyUsethefollowing proceduresto remove or replacean SBAR assembly(two a

55-30Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)5. The SBAR assembly is secured to the director b

5RRP: SBAR Assembly5-31Removal and Replacement Procedures (RRPs)1. Remove the replacement SBAR assembly from its protectiveanti-static bag.2. Inspect

55-32Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)8. Perform one of the following to verify SBAR op

5RRP: Fan Module5-33Removal and Replacement Procedures (RRPs)RRP: Fan ModuleUse the following procedures to remove or replace a fan module. Alist of t

1Director Description1-3General InformationFigure 1-1 Cabinet-Mounted Intrepid 6064 Directors and Management Server

55-34Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)Figure 5-11 Fan Module Removal and Replacement6.

5RRP: Fan Module5-35Removal and Replacement Procedures (RRPs)6. Inspect the fan module to ensure the amber LED is extinguished.If the LED is illuminat

55-36Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)12. If necessary, close and lock the equipment ca

5RRP: Power Module Assembly5-37Removal and Replacement Procedures (RRPs)RRP: Power Module AssemblyUsethefollowingprocedurestoremoveorreplacethepowermo

55-38Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)ATTENTION! To avoidcausing machine errorsor damag

5RRP: Power Module Assembly5-39Removal and Replacement Procedures (RRPs)2. Inspect the PWA side of the power module assembly for bent orbroken connect

55-40Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)— If at the management server, open the Hardware

5RRP: Backplane5-41Removal and Replacement Procedures (RRPs)RRP: BackplaneUse the following procedures to remove or replace the backplane. Alist of to

55-42Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)— If the director is installed in a McDATA-suppli

5RRP: Backplane5-43Removal and Replacement Procedures (RRPs)10. Remove both fan modules (RRP: Fan Module on page 5-33).11. Remove both SBAR assemblies

11-4Intrepid® 6064 Director Installation and Service ManualGeneral InformationField-Replaceable UnitsThe director provides a modular design that enabl

55-44Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)Replacement To replace the backplane and all FRUs

5RRP: Backplane5-45Removal and Replacement Procedures (RRPs)d. Verify the card stiffener is flush with the front of the card cageandevenwithotherdirec

55-46Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)Figure 5-14 Connection Description Dialog Boxf. T

5RRP: Backplane5-47Removal and Replacement Procedures (RRPs)Figure 5-16 COMnDialog Boxh. Configure the Port Settings parameters:• Bits per second - 57

55-48Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)Figure 5-17 HyperTerminal Dialog Boxl. Click Yes

5RRP: Backplane5-49Removal and Replacement Procedures (RRPs)a. Right-click the front panel bezel graphic (away from aFRU) to open a menu.b. Click the

55-50Intrepid® 6064 Director Installation and Service ManualRemoval and Replacement Procedures (RRPs)

Illustrated Parts Breakdown6-16Illustrated PartsBreakdownThis chapter provides an illustrated parts breakdown for all Intrepid6064 Director field-repl

66-2Intrepid® 6064 Director Installation and Service ManualIllustrated Parts BreakdownFront-Accessible FRUsFigure 6-1 illustrates the front-accessible

6Front-Accessible FRUs6-3Illustrated Parts BreakdownTable 6-1 Front-Accessible FRU Parts ListRef. Part Number Description Qty.6-1-1 Reference Base ass

1Field-Replaceable Units1-5General InformationFigure 1-3 Director FRUs (Rear Access)CableManagementAssemblyThe cable management assembly at the bottom

66-4Intrepid® 6064 Director Installation and Service ManualIllustrated Parts BreakdownRear-Accessible FRUsFigure 6-2 illustrates the rear-accessible F

6Rear-Accessible FRUs6-5Illustrated Parts BreakdownTable 6-2 Rear-Accessible FRU Parts ListRef. Part Number Description Qty.6-2-1 Reference Base assem

66-6Intrepid® 6064 Director Installation and Service ManualIllustrated Parts BreakdownMiscellaneous PartsFigure 6-3 illustrates the miscellaneous part

6Miscellaneous Parts6-7Illustrated Parts BreakdownTable 6-3 Miscellaneous PartsRef. Part Number Description Qty.6-1 002-002317-000 Torque driver with

66-8Intrepid® 6064 Director Installation and Service ManualIllustrated Parts BreakdownPower Cords and ReceptaclesFigure 6-4 illustrates the optional p

6Power Cords and Receptacles6-9Illustrated Parts BreakdownTable 6-4 Power Cord and Receptacle ListRef. Part Number Description Feature-1 806-000001-00

66-10Intrepid® 6064 Director Installation and Service ManualIllustrated Parts Breakdown-12 806-000040-000 Power cord, AC, United States (Chicago)NEMA

Event Code TablesA-1AEvent Code TablesAn event is an occurrence (state change, problem detection, orproblem correction) that requires user attention o

AA-2Intrepid® 6064 Director Installation and Service ManualEvent Code TablesIn addition to numerical event codes, the tables in this appendix alsoprov

ASystem Events (000 through 199)A-3Event Code TablesSystem Events (000 through 199)Event Code: 001Message: System power-down.Severity: Informational.E

Intrepid® 6064 Director Installation and Service ManualiiiCopyright © 2000-2005 McDATA Corporation. All rights reserved.Printed July 2005Twelfth Editi

11-6Intrepid® 6064 Director Installation and Service ManualGeneral InformationThe CTP2 card provides an initial machine load (IML) button and aRESET b

AA-4Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 011Message: Login Server database invalid.Severity: Minor.Expl

ASystem Events (000 through 199)A-5Event Code TablesEvent Code: 021Message: Name Server database invalid.Severity: Minor.Explanation: Following a CTP

AA-6Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 050Message: Management server unable to synchronize databases.

ASystem Events (000 through 199)A-7Event Code TablesEvent Code: 052Message: Management Server internal error.Severity: Informational.Explanation: An i

AA-8Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 061Message: Fabric controller database invalid.Severity: Minor

ASystem Events (000 through 199)A-9Event Code TablesEvent Code: 063Message: Remote switch has too many ISLs.Severity: Major.Explanation: The fabric el

AA-10Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 070Message: E_Port is segmented.Severity: Informational.Expla

ASystem Events (000 through 199)A-11Event Code TablesEvent Code: 071Message: Switch is isolated.Severity: Informational.Explanation: The director is i

AA-12Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 072Message: E_Port connected to unsupported switch.Severity:

ASystem Events (000 through 199)A-13Event Code TablesEvent Code: 074Message: ILS frame delivery error threshold exceeded.Severity: Informational.Expla

1Field-Replaceable Units1-7General InformationEach card faceplate contains a green LED that illuminates if the cardis operational and active, and an a

AA-14Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 075Message: E_Port segmentation recovery.Severity: Informatio

ASystem Events (000 through 199)A-15Event Code TablesEvent Code: 080Message: Unauthorized worldwide name.Severity: Informational.Explanation: The worl

AA-16Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Data: The first byte of event data (byte 0) specifies the port numb

ASystem Events (000 through 199)A-17Event Code TablesEvent Code: 082Message: Port fencing - port fenced.Severity: Informational.Explanation: Port is d

AA-18Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 083Message: Port inactive—port set to inactivate state (Relea

ASystem Events (000 through 199)A-19Event Code TablesEvent Code: 090Message: Database replication time out.Severity: Minor.Explanation: Replication of

AA-20Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 120Message: Error detected while processing system management

ASystem Events (000 through 199)A-21Event Code TablesDistribution: Director Management Server HostNonvolatileSystemEvent LogSystemError LEDEvent Log E

AA-22Intrepid® 6064 Director Installation and Service ManualEvent Code TablesDistribution: Director Management Server HostNonvolatileSystemEvent LogSy

ASystem Events (000 through 199)A-23Event Code TablesEvent Data: Byte 0 = Port number reporting low BB_Credit relieved.Distribution: Director Manageme

11-8Intrepid® 6064 Director Installation and Service ManualGeneral InformationFigure 1-4 UPM Card LEDs and ConnectorsSFP TransceiversSinglemode or mul

AA-24Intrepid® 6064 Director Installation and Service ManualEvent Code TablesExplanation: A fabric-wide configuration activation failed. For example,

APower Supply Events (200 through 299)A-25Event Code TablesPower Supply Events (200 through 299)Event Code: 200Message: Power supply AC voltage failur

AA-26Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 202Message: Power supply thermal failure.Severity: Major.Expl

APower Supply Events (200 through 299)A-27Event Code TablesEvent Code: 204Message: Power supply DC voltage recovery.Severity: Informational.Explanatio

AA-28Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 207Message: Power supply installed.Severity: Informational.Ex

AFan Module Events (300 through 399)A-29Event Code TablesFan Module Events (300 through 399)Event Code: 300Message: Cooling fan propeller failed.Sever

AA-30Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 302Message: Cooling fan propeller failed.Severity: Major.Expl

AFan Module Events (300 through 399)A-31Event Code TablesEvent Code: 304Message: Cooling fan propeller failed.Severity: Major.Explanation: Five coolin

AA-32Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 310Message: Cooling fan propeller recovered.Severity: Informa

AFan Module Events (300 through 399)A-33Event Code TablesEvent Code: 312Message: Cooling fan propeller recovered.Severity: Informational.Explanation:

1Field-Replaceable Units1-9General InformationFigure 1-5 Small Form-Factor Pluggable (SFP) transceiverPower SupplyRedundant, load-sharing power suppli

AA-34Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 314Message: Cooling fan propeller recovered.Severity: Informa

AFan Module Events (300 through 399)A-35Event Code TablesEvent Code: 320Message: Fan module removed.Severity: Major.Explanation: A fan module was remo

AA-36Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 333Message: Rear bottom fan tray removed.Severity: Major.Expl

ACTP/CTP2 Card Events (400 through 499)A-37Event Code TablesCTP/CTP2 Card Events (400 through 499)Event Code: 400Message: Power-up diagnostics failure

AA-38Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 411Message: Firmware fault.Severity: Major.Explanation: Firmw

ACTP/CTP2 Card Events (400 through 499)A-39Event Code TablesEvent Code: 414Message: Backup CTP card failure.Severity: Major.Explanation: The backup CT

AA-40Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 416Message: Backup CTP card installed.Severity: Informational

ACTP/CTP2 Card Events (400 through 499)A-41Event Code TablesEvent Code: 418Message: User-initiated CTP card switchover.Severity: Informational.Explana

AA-42Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 421Message: Firmware download complete.Severity: Informationa

ACTP/CTP2 Card Events (400 through 499)A-43Event Code TablesEvent Code: 423Message: CTP firmware download initiated.Severity: Informational.Explanatio

11-10Intrepid® 6064 Director Installation and Service ManualGeneral InformationPower ModuleAssemblyThe power module assembly is located at the bottom

AA-44Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 427Message: Utility bus error detected by backup CTP.Severity

ACTP/CTP2 Card Events (400 through 499)A-45Event Code TablesDistribution: Director Management Server HostNonvolatileSystemEvent LogSystemError LEDEven

AA-46Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 432Message: Ethernet adapter reset.Severity: Minor.Explanatio

ACTP/CTP2 Card Events (400 through 499)A-47Event Code TablesEvent Code: 440Message: Embedded port hardware failed.Severity: Major.Explanation: The emb

AA-48Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 450Message: Serial number mismatch detected.Severity: Informa

ACTP/CTP2 Card Events (400 through 499)A-49Event Code TablesEvent Code: 452Message: Backup CTP incompatible with configured system settings.Severity:

AA-50Intrepid® 6064 Director Installation and Service ManualEvent Code TablesPort Card (UPM) Events (500 through 599)Event Code: 500Message: Port card

APort Card (UPM) Events (500 through 599)A-51Event Code TablesEvent Code: 502Message: Port module anomaly detected.Severity: Informational.Explanation

AA-52Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 504Message: Port module failure.Severity: Major.Explanation:

APort Card (UPM) Events (500 through 599)A-53Event Code TablesEvent Code: 506Message: Fibre Channel port failure.Severity: Major.Explanation: A Fibre

1Error-Detection, Reporting, and Serviceability Features1-11General Informationtransmission without interruption.Failover tothebackupassembly istransp

AA-54Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 508Message: Fibre Channel port anomaly detected.Severity: Inf

APort Card (UPM) Events (500 through 599)A-55Event Code TablesDistribution: Director Management Server HostNonvolatileSystemEvent LogSystemError LEDEv

AA-56Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 512Message: SFP/XFP optical transceiver nonfatal error.Severi

APort Card (UPM) Events (500 through 599)A-57Event Code TablesEvent Code: 514Message: SFP/XFP optical transceiver failure.Severity: Major.Explanation:

AA-58Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 516Message: SFP/XFP optics digital diagnostics alarm threshol

APort Card (UPM) Events (500 through 599)A-59Event Code TablesEvent Code: 581Message: Implicit incident.Severity: Major.Explanation: An attached open

AA-60Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 583Message: Loss of signal or loss of synchronization.Severit

APort Card (UPM) Events (500 through 599)A-61Event Code TablesEvent Code: 585Message: Primitive sequence timeout.Severity: Major.Explanation: An attac

AA-62Intrepid® 6064 Director Installation and Service ManualEvent Code TablesSBAR Events (600 through 699)Event Code: 600Message: SBAR hot-insertion i

ASBAR Events (600 through 699)A-63Event Code TablesEvent Code: 602Message: SBAR anomaly detected.Severity: Informational.Explanation: Director operati

11-12Intrepid® 6064 Director Installation and Service ManualGeneral Information• An RS-232 maintenance port at the rear of the director (portaccess is

AA-64Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 604Message: SBAR failure.Severity: Major.Explanation: The ind

ASBAR Events (600 through 699)A-65Event Code TablesEvent Code: 607Message: Director contains no operational SBARs.Severity: Severe.Explanation: The di

AA-66Intrepid® 6064 Director Installation and Service ManualEvent Code TablesThermal Events (800 through 899)Event Code: 800Message: High temperature

AThermal Events (800 through 899)A-67Event Code TablesEvent Code: 802Message: Port module shutdown due to thermal violation.Severity: Major.Explanatio

AA-68Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 806Message: Critically hot temperature warning (SBAR thermal

AThermal Events (800 through 899)A-69Event Code TablesEvent Code: 810Message: High temperature warning (CTP card thermal sensor).Severity: Major.Expla

AA-70Intrepid® 6064 Director Installation and Service ManualEvent Code TablesEvent Code: 812Message: CTP card shutdown due to thermal violation.Severi

Director SpecificationsB-1BDirector SpecificationsThis appendix lists physical characteristics, storage and shippingenvironment, and operating environ

BB-2Intrepid® 6064 Director Installation and Service ManualDirector SpecificationsTop and bottom: No clearance requiredShock and vibration tolerance:6

BB-3Director Specifications10° maximumFabricenterEquipment CabinetService ClearancesFront: 91.4 centimeters (36.0 inches)Rear: 91.4 centimeters (36.0

1Element Manager Status Indicators1-13General Information• SNMP management using the Fibre Channel Fabric Element MIB(Version 1.1), transmission contr

BB-4Intrepid® 6064 Director Installation and Service ManualDirector Specifications

Management Server and Ethernet HubC-1CManagement Server andEthernet HubThis appendix describes the management server and the optional,Ethernet hub.Man

CC-2Intrepid® 6064 Director Installation and Service ManualManagement Server and Ethernet Hubremote user workstations. The second adapter (LAN 2) atta

CEthernet Hub DescriptionC-3Management Server and Ethernet Hub.Figure C-2 24-Port Ethernet HubHubscan be daisy-chainedtoprovideadditionalconnections a

CC-4Intrepid® 6064 Director Installation and Service ManualManagement Server and Ethernet Hub

Restore Management ServerD-1DRestore ManagementServerThe procedure in this appendix provides information to restore therack-mount management server af

DD-2Intrepid® 6064 Director Installation and Service ManualRestore Management Server• SAN management data directory backup on CD-ROM - TheSAN manageme

DRestore Management Server ProcedureD-3Restore Management Server4. After the restore completes, the server makes a series of beeps.Remove theManagemen

DD-4Intrepid® 6064 Director Installation and Service ManualRestore Management ServerFigure D-1 Run Dialog Box11. At the Run dialog box, type D:\mcdata

DRestore Management Server ProcedureD-5Restore Management Server17. Power off and reboot the server.a. At the Windows 2000 desktop, click Start at the

11-14Intrepid® 6064 Director Installation and Service ManualGeneral InformationTools and Test EquipmentThis section describes tools and test equipment

DD-6Intrepid® 6064 Director Installation and Service ManualRestore Management Servere. Click theSendCtrl-Alt-Delbutton atthe topof the window tologon

DRestore Management Server ProcedureD-7Restore Management Serverg. Type the SAN management application default user ID andpassword and select a server

DD-8Intrepid® 6064 Director Installation and Service ManualRestore Management Server

Safety Notices (Multi-Lingual Translations)E-1ESafety Notices(Multi-LingualTranslations)The DANGER and CAUTION safety notices in this publication arep

EE-2Intrepid® 6064 Director Installation and Service ManualSafety Notices (Multi-Lingual Translations)DANGERUse the supplied power cords. Ensure the f

EE-3Safety Notices (Multi-Lingual Translations)

EE-4Intrepid® 6064 Director Installation and Service ManualSafety Notices (Multi-Lingual Translations)DANGERDANGERUtiliser les câbles d’alimentation f

EE-5Safety Notices (Multi-Lingual Translations)PERICOLOUsare il cavo di alimentazione in dotazione. Assicurarsi che la presadi corrente a disposizione

EE-6Intrepid® 6064 Director Installation and Service ManualSafety Notices (Multi-Lingual Translations)PERIGOUse os cordões elétricos fornecidos. Certi

EE-7Safety Notices (Multi-Lingual Translations)PRECAUCIÓNTenga mucho cuidado al levantar el producto para moverlo.PELIGROUtilice los cables de aliment

1Tools and Test Equipment1-15General InformationFigure 1-6 Torque Tool and Hex Adapter• Door key - The door key with 5/16” socket (Figure 1-7)isrequir

EE-8Intrepid® 6064 Director Installation and Service ManualSafety Notices (Multi-Lingual Translations)

Glossaryg-1GlossaryThis glossary defines terms used in this manual or terms related tothe product. It is not a comprehensive glossary of computer term

g-2Intrepid® 6064 Director Installation and Service ManualGlossary10 Gbps port modulecardA printed circuit board (Intrepid-series directors only) that

Glossaryg-3GlossaryBB_Credit See buffer-to-buffer credit.beaconing The use of light-emitting diodes on ports, port cards, FRUs, directors,and switches

g-4Intrepid® 6064 Director Installation and Service ManualGlossaryCcall-home A configurable director or switch feature that enables the attachedmanage

Glossaryg-5Glossaryconfiguration data A collection of data thatresults from configuring director, switch,andsystem operating parameters. Configuration

g-6Intrepid® 6064 Director Installation and Service ManualGlossaryfor use in enterprise computing environments. Contrast with fabricswitch.DNS See dom

Glossaryg-7GlossaryEFCM Lite application The EFCM Lite application bundles the EFC Manager application,director or switch-specific Element Manager app

g-8Intrepid® 6064 Director Installation and Service ManualGlossarymanagement and increase storage from 2 gigabyte to 6 terabytes. Thearchitecture was

Glossaryg-9GlossaryFFabric Log A log recorded at the EFC Manager application that displays the timeand nature of changes made to a managed fabric, suc

Intrepid® 6064 Director Installation and Service Manualiv

11-16Intrepid® 6064 Director Installation and Service ManualGeneral InformationFigure 1-9 Fiber-Optic Protective Plug• Null modem cable - An asynchron

g-10Intrepid® 6064 Director Installation and Service ManualGlossaryFC-3 The Fibre Channel layer that provides a set of services commonacross multiple

Glossaryg-11GlossaryFibre Connection An IBM architecture, technology, and set of products and servicesintroduced in 1999 and based on the Fibre Channe

g-12Intrepid® 6064 Director Installation and Service ManualGlossaryGgateway address For TCP/IP applications, the address of a router to which a device

Glossaryg-13GlossaryGLS card A G_Port, Longwave laser, Singlemode fiber variant of an ED-5000Director GPM card. The card provides four longwave laser

g-14Intrepid® 6064 Director Installation and Service ManualGlossaryhigh speed serial dataconnectorA 20-pin serial connector type that provides connect

Glossaryg-15GlossaryIP address See Internet protocol address.IPL See initial program load.ISL See interswitch link.KKb See kilobit.KB See kilobyte.kil

g-16Intrepid® 6064 Director Installation and Service ManualGlossarylink incident The interruption of traffic on a Fibre Channel link due to loss of li

Glossaryg-17Glossarymanagementinformation baseThe related set of software objects (variables) that a gateway runningthe SNMP management protocol maint

g-18Intrepid® 6064 Director Installation and Service ManualGlossarymultimode opticalfiberA graded-index or step-index optical fiber that allows more t

Glossaryg-19Glossarythe implementation of a layer can be changed without affecting otherlayers.open-systemsmanagement serverAn optional feature that e

1Director Management1-17General Information• Maintenance terminal (desktop or notebook PC) - The PC isrequired to configure director network addresses

g-20Intrepid® 6064 Director Installation and Service ManualGlossarypreferred domain ID The domain ID that a director or switch requests from a fabricp

Glossaryg-21Glossaryredundancy Performance characteristic of a system or product whose integralcomponents are backed up by identical components to whi

g-22Intrepid® 6064 Director Installation and Service ManualGlossaryscalable The ability of a system to adapt to increased demands. A scalablenetwork c

Glossaryg-23Glossarysmall form factorpluggable transceiverA laser-driven small form factor optical transceiver used for a widerange of networking appl

g-24Intrepid® 6064 Director Installation and Service ManualGlossaryA low value indicates a high likelihood of becoming the principalswitch.TTCP See tr

Glossaryg-25Glossaryuninterruptable powersupplyA buffer between public utility power or other power source, and asystem that requires precise, uninter

g-26Intrepid® 6064 Director Installation and Service ManualGlossarywide area network A network that covers a larger geographical area than a LAN andwh

Indexi-1Numerics10 Gbps form factor pluggable optical transceiverSee XFP optical transceiver10/100 BaseT ethernet hub 1-110/100 Mbps ethernet port 1-6

Intrepid® 6064 Director Installation and Service Manuali-2Indexconfigure through Element Manager2-69enable through EFCM Basic 2-29enable through Eleme

i-3IndexIndexRADIUS serverElement Manager 2-69SANtegrity authenticationElement Manager 2-68SANtegrity bindingElement Manager 2-68SAN management applic

11-18Intrepid® 6064 Director Installation and Service ManualGeneral Information• Simple network management protocol (SNMP). An SNMP agentis implemente

Intrepid® 6064 Director Installation and Service Manuali-4IndexWindows password 4-49Windows user name 4-49diagnosticsport diagnostics 4-11dimensions,

i-5IndexIndexembedded port frame logEFCM Basic Edition 4-10embedded port log 4-7embedded port subsystem 1-6embedded web server interfaceSee SANpiloten

Intrepid® 6064 Director Installation and Service Manuali-6Indexfabric parametersconfigureEFCM Basic 2-17Element Manager 2-58Fabricenter cabinet 1-1doo

i-7IndexIndexGg_portUPM card 1-7gateway addresschange switch address 2-18, 2-31default 4-2, 5-1director default 3-1management server default 2-49switc

Intrepid® 6064 Director Installation and Service Manuali-8Indexpreferred path 2-70Intrepid 6064 DirectorSee directorIP addresschange switch address 2-

i-9IndexIndexfault isolation 3-20Fibre Alliance MIB 1-13firmware versions, storing 4-41installation 2-34LCD panel password 2-36restore procedure D-2re

Intrepid® 6064 Director Installation and Service Manuali-10IndexElement Manager application 4-14open trunking 4-21operational 4-14trafficEFCM Basic Ed

i-11IndexIndexinstallation 2-3installing software 4-47internal loopback test 4-21IPL 4-39managing configuration data 4-50managing firmware versions 4-

Intrepid® 6064 Director Installation and Service Manuali-12Indexlaser compliance -xxmulti-lingual notices E-1safety notices, multi-lingual E-1SAN mana

i-13IndexIndexswitch default 2-1swapping ports, procedure 4-29switch bindingconfigureEFCM Basic 2-29Element Manager 2-69description 2-69enableEFCM Bas

Installation Tasks2-12Installation TasksThis chapterdescribes tasks to install, configure, and verifyoperationof the Intrepid 6064 Director using a st

Intrepid® 6064 Director Installation and Service Manuali-14Indexverifymanagement server restore information 2-49switch-to-server communication 2-50ver

22-2Intrepid® 6064 Director Installation and Service ManualInstallation TasksTable 2-2 lists factory-set defaults for the rack-mount managementserver

2Installation Tasks2-3Installation TasksInstallation Task SummaryTable 2-3 summarizes the installation tasks for the director, optionalmanagement serv

22-4Intrepid® 6064 Director Installation and Service ManualInstallation TasksTask 18: Set Director Date and TimeRequired if management server is used.

2Installation Tasks2-5Installation TasksTask 1: Verify Installation RequirementsVerify that the following requirements are met prior to director andma

22-6Intrepid® 6064 Director Installation and Service ManualInstallation TasksTask 2: Unpack, Inspect, and Install the Ethernet Hub (Optional)The direc

2Installation Tasks2-7Installation TasksDesktop InstallationTo install and configure up to three Ethernet hubs on a desktop:1. Remove the backing from

ContentsvPreface...xviiChapter

22-8Intrepid® 6064 Director Installation and Service ManualInstallation TasksFigure 2-1 Patch Cable and MDI Selector ConfigurationRack-Mount Installat

2Installation Tasks2-9Installation Tasks2. Position the hub in the equipment rack. Align screw holes in themounting brackets with screw holes in the r

22-10Intrepid® 6064 Director Installation and Service ManualInstallation TasksCAUTIONUse safe lifting practices when moving the product.Unpack and ins

2Installation Tasks2-11Installation TasksNOTE: The director does not have a power switch. Therefore the directorpowers on when its power cords are con

22-12Intrepid® 6064 Director Installation and Service ManualInstallation Tasks— If the director will be managed through the EFCM BasicEdition interfac

2Installation Tasks2-13Installation Tasks• Ports - includes basic information, buffer-to-buffer credits(BB_Credits), and N_Port identifier virtualizat

22-14Intrepid® 6064 Director Installation and Service ManualInstallation TasksFigure 2-4 Identification ViewConfigure Date and TimePerform this proced

2Installation Tasks2-15Installation TasksFigure 2-5 Date Time ViewConfigure ParametersPerform this procedure to configure director operating parameter

22-16Intrepid® 6064 Director Installation and Service ManualInstallation Tasksb. At the Rerouting Delay field, check (enable) or uncheck theparameter.

2Installation Tasks2-17Installation TasksConfigure Fabric ParametersPerform this procedure to configure fabric operating parameters.1. Set the directo

Intrepid® 6064 Director Installation and Service ManualviContents2-6Unpack and Inspect Ethernet Hub ...2-6Deskto

22-18Intrepid® 6064 Director Installation and Service ManualInstallation TasksPrincipal is the highest priority setting, Default is next, andNever Pri

2Installation Tasks2-19Installation TasksFigure 2-8 Network Viewa. At the IP Address field, type the new value (default is10.1.1.10).b. At the Subnet

22-20Intrepid® 6064 Director Installation and Service ManualInstallation Taskse. Click close (X)atthe upperrightcorner of the DOSwindow toclose the wi

2Installation Tasks2-21Installation TasksFigure 2-9 Basic Information ViewConfigure Port BB_CreditPerform this procedure to configure port receive BB_

22-22Intrepid® 6064 Director Installation and Service ManualInstallation Tasks(Install PFE Keys (Optional) on page 2-26). Perform this procedure tocon

2Installation Tasks2-23Installation Tasksc. Check the Enable Authentication Traps check box to enabletransmission of SNMP trap messages to recipients.

22-24Intrepid® 6064 Director Installation and Service ManualInstallation TasksFigure 2-11 CLI ViewEnable or Disable Host ControlPerform this procedure

2Installation Tasks2-25Installation TasksConfigure SSL EncryptionSSL is aprotocol thatencrypts internet communications. Theprotocoluses key encryption

22-26Intrepid® 6064 Director Installation and Service ManualInstallation TasksFigure 2-13 SSL ViewInstall PFE Keys (Optional)The following PFE-keyed o

2Installation Tasks2-27Installation Tasks• OpenTrunking - Thisfeature provides dynamic loadbalancing ofFibre Channel traffic across multiple ISLs.• Pr

viiContentsContentsTask 16: Configure PFE Key (Optional)...2-51Task 17: Configure Management Server (Optional)...

22-28Intrepid® 6064 Director Installation and Service ManualInstallation Tasks3. Click OK. New PFE keys activate, the message "Featureinstallatio

2Installation Tasks2-29Installation Tasks• Authentication settings - The Authentication Settings Viewprovides pages to configure the optional SANtegri

22-30Intrepid® 6064 Director Installation and Service ManualInstallation TasksTo configure optional security features, refer to the McDATA EFCMBasic E

2Installation Tasks2-31Installation TasksNOTE: If multiple products and themanagement server are delivered ina Fabricenter equipment cabinet, all devi

22-32Intrepid® 6064 Director Installation and Service ManualInstallation TasksFigure 2-15 Connection Description Dialog Box5. Type a descriptive direc

2Installation Tasks2-33Installation Tasks— IP Address (default is 10.1.1.10).— Subnet Mask (default is 255.0.0.0).— Gateway Address (default is 0.0.0.

22-34Intrepid® 6064 Director Installation and Service ManualInstallation Tasks— If the director is delivered separately from the managementserver, go

2Installation Tasks2-35Installation Tasks4. Connect the server to the Ethernet LAN segment or Ethernet hub(private LAN interface):a. Connect one end o

22-36Intrepid® 6064 Director Installation and Service ManualInstallation Tasks8. When the power cord is connected, the server powers on andperforms po

2Installation Tasks2-37Installation Tasks1. At the management server LCD panel, press ENTER.TheWelcome!! or operational information message changes to

Intrepid® 6064 Director Installation and Service ManualviiiContentsObtaining Port Diagnostic Information...4-11Por

22-38Intrepid® 6064 Director Installation and Service ManualInstallation TasksConfigure Public LAN Addresses (Optional)To optionally configure TCP/IP

2Installation Tasks2-39Installation Tasks2. At the PC, enter the LAN 2 IP address of the server, followed by:5800, as the Internet uniform resource lo

22-40Intrepid® 6064 Director Installation and Service ManualInstallation Tasks4. At the Computer Name field, change the name to MGMTSERVER.Click (sele

2Installation Tasks2-41Installation TasksFigure 2-18 Internet Protocol (TCP/IP) Properties Dialog Box5. The Use the following IP address radio button

22-42Intrepid® 6064 Director Installation and Service ManualInstallation TasksTask 9: Configure Windows Operating System UsersConfigure password acces

2Installation Tasks2-43Installation Tasks4. Select the Standarduser, Restricteduser,orOtherradio button.If theOther radio button is selected, choose t

22-44Intrepid® 6064 Director Installation and Service ManualInstallation Tasks5. Ifnootheruserswillbechanged,closealldialogboxesandreturnto the Window

2Installation Tasks2-45Installation TasksFigure 2-21 Date/Time Properties Dialog Box (Time Zone Tab)3. To change the time zone:a. Selecttheappropriate

22-46Intrepid® 6064 Director Installation and Service ManualInstallation TasksFigure 2-22 Date/Time Properties Dialog Box (Date & Time Tab)Task 11

2Installation Tasks2-47Installation TasksTask 12: Assign User Names and PasswordsIn addition to password access for the Windows operating system,users

ixContentsContentsRestore Configuration (EFCM Basic Edition)...4-54Reset Configuration Data (EFCM Basic Edition) ...4-55

22-48Intrepid® 6064 Director Installation and Service ManualInstallation Tasks• User ID - Type a unique user ID for the new user.• Secure password - T

2Installation Tasks2-49Installation TasksFigure 2-24 Address Properties Dialog Box (IP Address Page)Task 14: Record or Verify Server Restore Informati

22-50Intrepid® 6064 Director Installation and Service ManualInstallation Tasks• Gateway address - default is blank.• DNS server IP address - default i

2Installation Tasks2-51Installation Tasks2. Right-click the director icon at the SAN management applicationphysical map. A pop-up menu appears.3. Sele

22-52Intrepid® 6064 Director Installation and Service ManualInstallation TasksDuring the grace period, a No Feature Key dialog box appearswhen the Ele

2Installation Tasks2-53Installation TasksFigure 2-25 New Feature Key Dialog Box3. Type the PFE key (case-sensitive xxxx-xxxx-xxxx-xx format) andclick

22-54Intrepid® 6064 Director Installation and Service ManualInstallation TasksTask 18: Set Director Date and TimeLog entries are stamped with the date

2Installation Tasks2-55Installation Tasks•Second(SS): 0 through 59.d. Click Activate to set the director date and time and close thedialog box.3. To s

22-56Intrepid® 6064 Director Installation and Service ManualInstallation TasksConfigure Director IdentificationPerform this procedure to configure the

2Installation Tasks2-57Installation Tasks2. Select Operating Parameters and Switch Parameters from theConfigure menu at any view. The Configure Switch