McDATA Sphereon 4300 User Manual download pdf (Page 118)

4-16

McDATA Sphereon 4300 Fabric Switch Installation and Service Manual

Repair Information

2. At the EFCM Basic Edition interface, select Ports and Diagnostics

from the Maintenance menu at any view. The Diagnostics View

displays (Figure 4-4).

Figure 4-4 Diagnostics View

3. Type the port number to be tested in the Targeted Port Number

field.

4. At the Diagnostic Test list box, select the Internal Loopback option.

5. Click Start. The test begins and:

a. The Diagnostics View changes to a Diagnostics - Executing View.

b. The message Diagnostics Time Remaining: xx appears,

where xx are the seconds remaining in the test. The test takes

approximately 30 seconds.

NOTE: Click Stop at any time to abort the loopback test.

6. When the test completes, the Diagnostics - Executing View reverts

to the Diagnostics View. Test results appear as Passed, Failed, or

Test Incomplete in the message area of the view.

7. Reset the tested port:

a. Select Ports and Reset from the Maintenance menu at any view.

The Reset View displays.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 187 188

No comments

McDATA Sphereon 4300 User Manual Page 118