McDATA Sphereon 4300 User Manual download pdf (Page 121)

Repair Information

4-19

Repair Information

2. Right-click the Data Collection link to open a list of menu options.

Select the Save Target As menu option. The Save As dialog box

displays.

3. Insert a blank diskette in the floppy drive of the PC

communicating with the EFCM Basic Edition interface.

4. At the Save As dialog box, select the floppy drive (A:\) from the

Save in drop-down menu, type a descriptive name for the zipped

(.zip) dump file in the File name field, and click Save.

5. A Download dialog box displays, showing the estimated time

remaining to complete the download process. When finished, the

dialog box changes to a Download complete dialog box.

6. Click Close to close the dialog box.

7. Remove the diskette with the newly-collected maintenance data

from the PC floppy drive. Return the diskette with the failed FRU

to support personnel for failure analysis.

Set Online State

This section describes procedures to set the product online or offline.

Operational states are:

• Online - When the product is set online, an attached device can

zone can communicate with each other.

• Offline - When the product is set offline, all ports are set offline

and operation of attached Fibre Channel devices is disrupted. The

product transmits the OLS to attached devices, and the devices

cannot log in.

NOTE: Do not set the product offline unless directed to do so by a procedural

step or the next level of support.

To set the product online or offline:

1. At the EFCM Basic Edition interface, select Switch from the

Maintenance menu at any view. The Switch View displays

(Figure 4-6).

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 187 188

No comments

McDATA Sphereon 4300 User Manual Page 121