McDATA Sphereon 4300 User Manual download pdf (Page 37)

Installation Tasks

2-3

Installation Tasks

• Support is available for a browser-capable PC and Internet

connectivity to support the product-resident EFCM Basic Edition

interface.

• Support equipment and technical personnel are available for the

installation.

• The required number and type of fiber-optic jumper cables are

delivered and available. Ensure cables are the correct length and

have the required connectors.

• A Fabricenter cabinet or customer-supplied 19-inch equipment

rack and associated hardware are available (optional).

• Remote workstations or simple network management protocol

(SNMP) workstations are available (optional). Workstations are

customer-supplied and connected through a public or dedicated

LAN segment.

Task 2: Unpack, Inspect, and Install the Product

The following paragraphs provide instructions to unpack, inspect,

and install one or more switches. If the switch is delivered in a

Fabricenter equipment cabinet, go to Task 3: Configure Product at the

EFCM Basic Edition Interface.

Unpack and Inspect

Switch

Unpack and inspect switch(es) as follows:

1. Inspect shipping container(s) for damage. If a container is

damaged, ensure a freight carrier representative is present when

the container is opened. Unpack shipping container(s) and

inspect each item for damage. Ensure packaged items correspond

to items listed on the enclosed bill of materials.

2. If items are damaged or missing, contact the solution center:

Phone: (800) 752-4572 or (720) 558-3910

Fax: (720) 558-3851

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 187 188

No comments

McDATA Sphereon 4300 User Manual Page 37