McDATA 1U Server Service Manual download pdf (Page 209)

100

101

Swapping Ports

4-29

Repair Information

Figure 4-7 Basic Information View

2. Perform one of the following:

— Click the check box for the selected port in the Blocked column

to block the port or ports. A check mark in the box indicates

the port is blocked.

— Click the check box for the selected port in the Blocked column

to remove the check mark and unblock the port or ports. A

blank box indicates the port is unblocked.

3. Click OK at the bottom of the page to save and activate the

change. The message Your changes have been successfully

activated. appears.

Swapping Ports

Failure of port circuitry behind an optical transceiver may require

swapping the logical port address of the failed port to a known

operational port. This ensures the port address matches information

in the hardware configuration definition (HCD) of an attached host.

NOTE: This procedure swaps hexadecimal logical port addresses, not

decimal port numbers.

To swap ports:

1. At the Element Manager application, select Swap Ports from the

Maintenance menu. The Swap Ports dialog box displays

(Figure 4-8).

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 429 430

Comments to this Manuals

No comments

McDATA 1U Server Service Manual Page 209

Comments to this Manuals

Related products and manuals for Servers McDATA 1U Server