McDATA 1U Server Service Manual download pdf (Page 170)

3-46

McDATA Sphereon 4400 Fabric Switch Installation and Service Manual

Maintenence Analysis Procedures

An E_Port segmented (operational product) because a response

(hello timeout) to a verification check indicates an attached switch is

not operational.

a. Perform a data collection at the operational product and contact

the next level of support. Refer to Collecting Maintenance Data

(EFCM Basic Edition) or Collecting Maintenance Data (Element

Manager).

b. Go to MAP 0000: Start MAP and perform fault isolation for the

failed switch. Exit MAP.

Event code 072 indicates a product E_Port is connected to an

unsupported fabric element. Advise the customer of the problem and

disconnect the ISL to the unsupported fabric element. Exit MAP.

Event code 082 is informational only and indicates a product E_Port

is fenced (blocked). An application or hardware malfunction occurred

(as indicated by failure symptoms or primary event codes) or the port

fencing policy is too restrictive. Obtain supplementary event data as

follows:

a. At the Event Log, examine the first five bytes (0 through 4) of

event data.

b. Byte 0 specifies the E_Port reporting the problem. Byte 4

specifies the port fence code as listed in Ta bl e 3 - 1 5 .

Table 3-15 Port Fence Codes and Actions

Byte 4 Port Fence Code Action

01 Protocol error. Go to step 17.

02 Link-level hot I/O. Go to step 18.

03 Security violation. Go to step 19.

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 315 316

No comments

McDATA 1U Server Service Manual Page 170