4
Repair Procedures - EFCM Basic Edition
4-27
Repair Information
Figure 4-10 Restore Configuration View
3. Select the desired file from the PC hard drive at the Download
Configuration file from field, using the Browse button or type the
desired filename.
4. Click Send and Load Configuration. A message box appears,
indicating any browser operation will terminate the configuration
download.
5. Click OK to download the configuration. The process takes
several minutes to complete, during which the browser is
unavailable. When the process completes, the message
Configuration restored successfully. appears.
Reset Configuration
Data
When configuration data is reset to factory default values, the switch
defaults to the factory-set (Internet Protocol) IP address and all
optional features are disabled. To reset configuration data to factory
default settings:
Inform the customer the switch is to be set offline. Ensure the system
administrator quiesces Fibre Channel frame traffic through the
switch and sets attached FC-AL devices offline.
1. Set the switch offline. For instructions, refer to Setting Online
State.
2. Select Switch from the Maintenance menu (Maintenance>Switch).
The Switch View appears. (Figure 4-6).
3. Click Reset Configuration. A dialog box with the message Are you
sure that you want to reset the configuration? appears.
4. Click OK to reset the configuration.
5. The switch IP address resets to the default address of 10.1.1.10.
Comments to this Manuals